FBA receiving is essentially a highly automated scan-and-sort system. Damaged outer cartons, unreadable labels, and non-compliant pallet dimensions are the top causes of inbound exceptions. Amazon packaging and label rules update periodically; this checklist is for pre-shipment self-check reference; always defer to current official requirements in Seller Central.
I. Why Pre-Delivery Self-Check Matters (Cost Comparison)
| Problem type | Amazon handling | Impact on you |
|---|
| Damaged/soiled outer carton | Reject entire shipment or flag “problem carton” for manual handling | 3–7 day inbound delay; extra storage and handling fees |
| Blurred/unscannable FNSKU | Unplanned prep fee (€0.15–€0.30/unit); manual relabel before putaway | 1,000 units → €150–€300 extra; 2–5 day putaway delay |
| Wrong SKU or shipment label | Inventory mix-up; stockouts or wrong shipments; account review in severe cases | Sales interruption; bad reviews; account risk |
| Pallet size/material mismatch | Reject or repalletize; full batch back to overseas warehouse | 3–5 day delay; repalletize €150–€300; worse in peak |
| Overweight carton without “heavy” mark | Operators cannot identify; injury or equipment failure risk | Rejection + handling fee; safety complaint risk |
Core conclusion: A full pre-delivery self-check takes ~30 minutes but can avoid 3–7 days inbound delay and hundreds of euros in extras.
II. Outer Carton and Dunnage Checks
1. Carton requirements
| Check item | Standard | If violated | Self-check |
|---|
| Carton type | Six-sided rigid carton with intact flaps (double-wall or at least 32ECT) | Soft/single-wall → crush in transit → rejection | Press top—no obvious dent; no bulge when shaken |
| Appearance | No damage, heavy stains, moisture, or re-taping traces | Damage/stain → reject or “problem carton” | Visual all six sides—no holes/tears/water |
| Remove old labels | On reused cartons, fully remove or cover old shipment labels and unrelated marks | Old label conflicts → mis-scan / mix / reject | Black marker over old barcodes or full cover with new label |
| Carton dimensions | Longest side ≤ 175cm, second longest ≤ 80cm (per current Seller Central) | Oversize → large-item inbound approval or reject | Tape measure three sides; record on packing list |
2. Internal dunnage and protection
| Check item | Standard | If violated | Self-check |
|---|
| Individual unit packaging | Each sellable unit (SKU) has its own retail packaging—no naked mix in master carton | No retail pack → extra prep fee on receipt | Each unit in bubble wrap/blister/inner carton—not “naked” |
| Dunnage | Bubble wrap, air pillows, kraft paper; no styrofoam peanuts | Banned dunnage → whole carton rejected (peanuts clog sort equipment) | Spot-open one carton; confirm dunnage type |
| Fill density | Voids filled; light shake—contents must not shift heavily | Shift → impact damage → received as damaged | Shake before seal; add fill if loud movement |
| SKUs per carton | Max 5 SKUs per carton (some sites stricter—Seller Central) | Over limit → scan difficulty → 3–5 day putaway delay | Count SKUs per carton; split if >5 |
3. Sealing
| Check item | Standard | If violated | Self-check |
|---|
| Tape | Shipping-grade clear strong tape or brown tape, width ≥ 48mm | Fiber tape/straps/staples → cannot auto-open → reject | Check material/color; press for adhesion |
| Seal pattern | Top and bottom “H” seal (center + both edges) | Weak seal → burst in transit → reject | Full “H” on top and bottom |
| Banned materials | No nylon strapping, elastic bands, staples, metal clips, rope | May jam sort or injure staff → batch reject | Visual—no banned materials |
4. Per-carton size and weight limits
| Site / warehouse | Weight limit (reference) | Size limit (reference) | If exceeded |
|---|
| Most European FBA | ≤ 23kg (recommend ≤15kg) | Longest ≤175cm, second ≤80cm | >23kg needs “heavy” label; >30kg may reject |
| Some DE/PL sites | ≤ 23kg (stricter) | Must fit European pallet norms | Overweight may need manual handling €10–€25/carton |
⚠️ Heavy cartons: Between 15kg and 23kg, strongly recommend “Heavy Package” labels on top and sides. Confirm actual limits with carrier and target FBA site in Seller Central.
III. Three Label Types—What Each Does (Application Rules)
| Label type | Role | Application rules | Common errors |
|---|
| Product label (FNSKU) | Identifies each sellable SKU; core for putaway and pick scan | Cover original UPC/EAN if present; 1 label per unit on flat surface, scannable | ① Blur → scan fail → manual label €0.15–€0.30/unit ② Original barcode not covered → mis-ID / mix |
| Shipment/box label (Box Label) | Links each carton to Shipment ID | ≥2 labels per carton (different sides); multi-carton U001, U002… sequence | ① Same U number on multiple cartons → chaos ② Label on tape only → falls off |
| Pallet label | Truck inbound: pallet belongs to which shipment | One per side on pallet (4 total), height ~1.2–1.5m | ① Only 1 label → rotate pallet to scan ② Label on wrap outside damages → put on cartons then wrap with clear window |
Additional labels (as required)
| Label type | When | How |
|---|
| Heavy Package | Strongly recommend ≥ 15kg; mandatory logic >23kg per site | Top + side; clear “Heavy” text |
| Mechanical handling only | Large/overweight—not team-liftable | All four sides; “Team Lift” or “Mech. Handling” |
| Mixed SKU | 2+ SKUs in one carton | “Mixed SKU” beside shipment label |
| This side up / moisture / fragile | Fragile, glass/screen products | Multiple sides; correct orientation |
| Stackable / Non-stackable | Stacking rules | On pallet four sides and carton top; no stack on non-stackable |
IV. High-Risk Actions (Do Not Do)
| High-risk action | Consequence | Correct approach |
|---|
| Wrong store / wrong shipment | FNSKU maps to wrong account → mix; account risk | Second person verifies FNSKU vs marketplace/SKU; Shipment ID matches Seller Central |
| Factory ships unlabeled; label at port | Peak port/warehouse labeling queue 5–10 days; error-prone | Factory applies FNSKU + box labels; scan sample before ship |
| Consolidation warehouse / overseas relabeling | OK but budget €0.10–€0.30/unit and 2–5 days | Confirm fees and schedule; include in full-chain cost |
| Damaged or damp cartons | Collapse in transit → scatter → reject + damage | Single-use cartons; no obvious damage, moisture, or deformation |
| Plain paper vs A-grade adhesive labels | Moisture/friction → unreadable → prep fee + delay | A-grade adhesive or thermal + ribbon |
V. Pre-Delivery Self-Check SOP (24 Hours Before Ship)
Embed in company SOP; completed by designated person or overseas warehouse operator 24 hours before departure:
📦 Carton and dunnage (spot-open one carton)
- Six-sided rigid carton; no damage/stain/moisture/re-tape
- Old shipment marks fully removed or covered
- Each product has retail packaging (no naked mix)
- Dunnage: bubble/air/kraft only (no foam peanuts)
- Light shake—no heavy shift
- ≤5 SKUs per carton (if applicable)
- Shipping-grade clear tape, “H” seal, no banned materials
- Weight ≤23kg (recommend ≤15kg); dimensions within limits
🏷️ Label check (scanner or phone verify)
- FNSKU: 1 per unit, flat surface, covers original barcode if any, scannable
- Box labels: ≥2 per carton (different sides); U001, U002… correct sequence
- Pallet labels (if applicable): 1 per side (4 total), height 1.2–1.5m
- Extra labels: heavy, mechanical handling, mixed SKU, fragile, stacking
- EU compliance marks: CE, WEEE bin, Made in China, EU/UK rep (if required)
📄 Documents and system
- Shipment status “created” or “ready to ship” (not cancelled/closed)
- Box label Shipment ID matches Seller Central
- FNSKU + qty per carton matches packing list
- Commercial invoice + packing list with goods (customs backup)
VI. Common Failure Scenarios
| Scenario | Real case | Avoid |
|---|
| Blurry FNSKU print | A4 + inkjet; moisture destroyed barcode; 1,500 units prep €0.25 = €375 | A-grade adhesive or thermal + ribbon; scan sample after print |
| Overweight no heavy label | Furniture 28kg/carton; operator injured; batch returned; account safety review 1 month | Weigh before ship; ≥15kg label; ≥23kg split or confirm site acceptance |
| Same U number on all cartons | 10 cartons all U001; system sees 1; 9 stuck 2 weeks | Increment U001…U010 when printing |
| Old labels not removed | Reused carton old FNSKU conflicts; “unidentified inventory” 5-day delay | Black out all old codes or fully cover |
| Wrap covers pallet label | Label blurred; truck inbound scan fail; 3-day manual wait | Label → photo → wrap (film not over label, or clear window) |
| Shipment changed but labels not reprinted | 2→3 cartons; third carton no ID → rejected | Any quantity/site/SKU change → reprint all box labels; void old |
VII. Last 24 Hours Portable Checklist
Print at warehouse/consolidation bench; tick before ship:
□ Six-sided carton intact—no damage/stain/moisture
□ Old labels removed or covered
□ Fill tight—no rattle on shake
□ No styrofoam peanut dunnage
□ Clear strong tape, “H” seal
□ Weight ≤23kg (heavy label if >15kg)
□ FNSKU 1/unit, scannable, covers original barcode
□ Box labels ≥2/carton, U numbers sequential
□ Pallet labels 1/side if applicable
□ Extra labels complete (heavy/mechanical/fragile/stacking)
□ EU marks complete (CE/WEEE/Made in China/EU rep)
□ Shipment ID matches Seller Central
□ Packing list matches FNSKU counts
□ Invoice + packing list with shipment
VIII. Applies / does not apply
| Applies | Does not apply |
|---|
| Pre-shipment QC for European FBA replenishment | Replacing Seller Central official text |
| Reference for new sellers building packaging SOP | Blind copy for mature established processes |
| Self-check before consolidation/overseas warehouse ops | Oversize/irregular specials (assess separately) |