Knowledge15 min
How to Choose Common Pallet Sizes for European FBA / Truck Delivery
Choose European lane pallet specs by destination warehouse—UK and Continental Europe use different common sizes; do not apply domestic habits blindly.

Pallet specifications are among the most easily overlooked details in the European logistics chain—and among the costliest when wrong. They directly affect container utilization, whether truck carriers accept the freight, whether FBA rejects inbound, and how storage fees are calculated. The 1200×1000mm pallets commonly used in China are not universal in parts of Europe; discovering a mismatch only at last mile can mean a simple repalletizing surcharge—or an entire batch sent back to an overseas warehouse for repalletizing, costing at least 3–5 business days.
Core principle: European-lane sellers should write “destination-country standard pallet size + corresponding palletization method” into carton-plan SOPs, instead of “re-palleting on arrival” to match local habits.
I. Why Are Pallet Dimensions So Critical in Europe?
In the European logistics system, the pallet is the smallest handling unit. Automated warehouses, forklifts, containers, and trucks are all designed around specific pallet sizes. Choosing the wrong size leads to:
- Lower container utilization: Non-standard pallets cannot be packed tightly in 20GP/40HQ, wasting 10%–25% of interior space
- Truck carrier rejection: European trucking companies enforce strict pallet size limits; over-wide/over-long pallets cannot be secured in the trailer
- FBA inbound rejection or surcharge: Amazon Europe has explicit pallet rules; non-compliant pallets may be flagged as “problem pallets,” incurring extra handling fees or full-batch rejection
- Higher storage cost: Overseas warehouses charge by pallet position; non-standard pallets cannot go on standard racking and must sit on the floor at higher cost
| Problem scenario | Consequence | Time / cost loss |
|---|---|---|
| Pallet too wide (>1200mm) | Cannot load on standard truck; must break down and repalletize | 1–2 business days |
| Pallet height over limit (>1800mm) | Cannot enter FBA automated sort line; manual handling surcharged | €15–30/pallet surcharge |
| Wrong material (plastic vs wood) | Some FBA sites accept wood only; plastic rejected | 2–3 business days to swap pallets |
| Not four-way entry | Some sites’ equipment cannot handle; rejection | 1–2 business days |
II. Reference Table of Common European Lane Pallet Sizes
Before shipping, reconfirm with the destination site (FBA or overseas warehouse). The following is industry reference only—not an absolute standard.
| Region | Common footprint | Notes |
|---|---|---|
| Continental Europe (Germany, France, Netherlands, Belgium, Italy, Spain, etc.) | 1200 × 800 mm (EUR pallet / EPAL) | Matches EUR 1; base standard for Continental logistics; most automated warehouses and trucks are designed for this size |
| United Kingdom | 1200 × 1000 mm (UK / ISO pallet) | UK commonly uses 1200×1000mm, unlike Continental Europe. Some sites may accept 1200×800mm—confirm with the site |
| Some regions / specific sites | 1140 × 1140 mm (CHEP pallet) | Common in Nordic and parts of European supply chains; confirm acceptance with the site |
| FBA truck inbound | Standard wood pallet + four-way entry | Stretch wrap, no barrel stacking, cargo must not overhang; all four sides must allow forklift access |
⚠️ Special reminder: European FBA pallet requirements change over time. From 2025, some German FBA sites require ISPM 15 heat-treated wood with IPPC stamp—otherwise direct rejection. Always confirm latest requirements via Seller Central or your service provider before shipping.
III. Pallet Layout and Container Utilization by Container Type
The same pallet size packs differently by container type, directly affecting unit freight cost. Reference data:
| Container type | EUR pallet 1200×800mm | UK pallet 1200×1000mm | Notes |
|---|---|---|---|
| 20GP (internal 589×235×239cm) | ~10–11 pallets (2 rows × 5 + gap) | ~8–9 pallets (2 rows × 4) | EUR pallets utilize space significantly better |
| 40HQ (internal 1203×235×269cm) | ~23–25 pallets (2 rows × 11–12 + stagger) | ~18–20 pallets (2 rows × 9–10) | ~3–5 more EUR pallets per container |
| 40HQ (extra 30cm height) | Capacity doubles when stacking 2 layers (height limits apply) | Same when stacking 2 layers | Height limit often 180cm/pallet |
Core conclusion: For Continental sites, 1200×800mm improves utilization ~10%–20% vs 1200×1000mm. For UK, prioritize 1200×1000mm to match local operations. Sending EUR pallets to UK may still load and clear customs, but UK automation may be inefficient.
IV. Detailed Acceptance Requirements for FBA and Truck Delivery
1. Size and weight limits (reference—confirm with site)
| Parameter | Common limit range | Notes |
|---|---|---|
| Pallet footprint | ≤ 1200 × 1000mm (some sites accept 1200×800mm) | Over-wide/over-long cannot load on truck or enter warehouse |
| Pallet height (incl. goods) | ≤ 1500mm–1800mm (often 1600mm) | Over limit → manual handling or rejection |
| Gross weight per pallet | ≤ 500kg–600kg (often 500kg) | Overweight may require special equipment |
| Entry method | Four-way entry (fork from all directions) | Two-way pallets may be inoperable at some sites |
⚠️ Important: Values above are common European FBA ranges, not uniform legal standards. Actual height/weight limits vary by site, carrier, and last-mile mode. Get written confirmation from carrier/overseas warehouse at booking, or check target site guidance in Seller Central.
2. Material requirements
| Material | Use case | Notes |
|---|---|---|
| Wood (heat-treated / fumigated) | Widely accepted; default for FBA and overseas warehouse | IPPC mark (ISPM 15) required—or EU customs may require return or destruction |
| Plastic | Some FBA and overseas warehouse sites | Confirm in advance; no fumigation for customs but higher cost and some environmental rules |
| Paper / plywood | Limited to certain overseas warehouses or non-FBA delivery | Limited load; some sites explicitly reject |
3. Palletization rules (must-read pitfalls)
| Item | Requirement | If violated |
|---|---|---|
| No overhang | Cartons, accessories, or film must not extend past pallet edge | Cannot load → on-site repalletize → 1–2 day delay |
| Stretch wrap | At least 5 layers; top rain cover | Scatter or moisture → damage + rejection risk |
| Strapping | At least 2 cross straps/bands | Shift in transit → damage |
| Labels | FBA shipment labels on all four pallet sides, ≥1 per side | Incomplete labels → cannot scan inbound |
| Stacking | Confirm stackable; some sites surcharge non-stackable | Higher storage + wasted container space |
| Pallet cleanliness | No mold, infestation, or major damage | Customs fail + rejection |
| Height warning | If inner load is tall, “max height / do not invert” on all four sides | Side placement or crush may damage delicate parts |
4. Special requirements for truck (appointment) delivery to FBA
When using truck (appointment) delivery to FBA, carriers often also require:
- Each pallet label must include FBA shipment ID and carton count for warehouse verification
- SOP filed in advance: pallet photos, carton label photos, wrapping description for FBA appointment review
- All pallets in one shipment must have uniform size and height; mixed pallets may cause partial rejection
V. Selection checklist (confirm item by item before shipping)
Use before every pallet shipment; embed in company SOP:
| # | Check item | Y/N | Notes |
|---|---|---|---|
| 1 | Destination pallet size: □ 1200×800 □ 1200×1000 □ Other ______ | Written confirmation obtained | |
| 2 | Is wood mandatory? Is plastic allowed? | Material requirements confirmed | |
| 3 | IPPC fumigation stamp (ISPM 15) on wood? | No stamp → EU customs return | |
| 4 | Four-way entry pallet? | Two-way may be unhandleable | |
| 5 | Any overhang in any direction? | Overhang → rejection | |
| 6 | Total height within carrier limit? | Often ≤1600–1800mm | |
| 7 | Gross weight within carrier limit? | Often ≤500–600kg | |
| 8 | Stackable? If not, carrier informed? | Non-stackable needs special marking | |
| 9 | FBA labels on all four sides (≥1 each)? | Incomplete → scan fail | |
| 10 | Container stow plan matches destuff efficiency? | Poor stow → higher destuff fees | |
| 11 | Pallet photos, wrap, label positions pre-reviewed? | Catches issues early | |
| 12 | DG/magnetic/fragile: 9A/magnetic/fragile labels on pallet? | Extra IDs may be required |
VI. Common mistakes and how to avoid them
| ❌ Common mistake | Consequence | ✅ Correct approach |
|---|---|---|
| “One size fits all” 1200×1000mm to all Europe | 15%–20% wasted space to Continental Europe; hidden unit freight increase | 1200×800 for Continental, 1200×1000 for UK; written confirmation before ship |
| Ignoring ISPM 15 | No stamp → EU customs hold, return or destroy, thousands of euros | IPPC wood + fumigation certificate from supplier |
| Two-way entry pallets | Equipment at some FBA/overseas sites cannot operate | Uniform four-way entry |
| Cargo over pallet edge | Cannot load; repalletize on site; fees and delay | All cartons inside boundary; recheck after wrap |
| Forgot four-side labels | Scan fail; “problem” handling; 3–5 extra days | Outbound label SOP; clear labels all sides |
| Over height/weight without prior notice | Rejection or €25–50/pallet oversize fee | Confirm limits with carrier and FBA; mark actual dims on pallet |
| No backup pallet spec | Primary rejected at one site with no plan B | Confirm 1–2 backup sites and acceptable sizes before peak |
| EUR pallets to UK | May load/clear but low efficiency; “non-standard pallet” fees | Prefer 1200×1000 for UK unless site confirms other sizes |
VII. Practical advice: building pallet-spec SOP
- SKU–site–pallet mapping: Record pallet size, height, weight per SKU and common FBA/overseas site
- Written confirmation 2 weeks before ship: Seller Central case or overseas warehouse CS for latest rules (do not rely on old records)
- Photos after palletizing: Four sides, label placement, wrap—for traceability
- Pre-check stow plan with forwarder/carrier: Row layout, stack layers—avoid destuff surprises
- Pre-peak “pallet stress test”: 2–3 months ahead, one pallet trial to target site; reuse SOP in peak
- Cost of pallet swap at destination: If overseas warehouse pricing differs EUR vs UK pallets, evaluate port “swap” vs head-haul savings
VIII. Applies / does not apply
| Applies | Does not apply |
|---|---|
| Pallet freight to European FBA or overseas warehouse | North America 48×40 in pallet system (entirely different) |
| Sellers using truck (appointment) inbound | Parcel express (single cartons, no pallets) |
| Sellers optimizing utilization and reducing last-mile rejection | Sellers sending all Europe with domestic 1200×1000 only |
| Peak bulk replenishment needing smooth inbound | Loose small pieces with no palletization |

